3D Designer
Modules
At some point, things are going to get complex. You are going to have objects twisted around other objects, modifying other objects that are used in combination with yet more objects.
It helps then that openSCAD supports modules to organize stuff. Modules are simply a bunch of instructions that go together.
To illustrate how they work, let's make a funnel as shown in Figure 7.
A funnel is made up by two parts: a hollow, cut-off conical object that I am going to call the hat (I couldn't find formal names for the parts of a funnel, so I am improvising here), and a hollow cylinder I am calling the pipe.
Turns out both the hat and the pipe can be made entirely from cylinders, since the hat, for openSCAD, is a cylinder with two different diameters at each end. As you need it to be hollow, you make another cylinder with a slightly smaller radius at both ends and subtract that from the bigger one. The module for that would look like Listing 3.
Listing 3
Hat Module
module hat () { difference () { cylinder (r1=8, r2=2, h=10, center=true, $fn=50); cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); } }
The pipe module is even simpler (Listing 4), but you do have to remember to translate the lower end of the pipe to the top of the hat (line 2).
Listing 4
Pipe Module
01 module pipe () { 02 translate ([0,0,10]) { 03 difference () { 04 cylinder (r=2, h=10, center=true, $fn=50); 05 cylinder (r=1.5, h=10, center=true, $fn=50); 06 } 07 } 08 }
With these two modules, you can create a funnel ()
module that calls the other two (Listing 5, lines 17 to 20). Then call the funnel ()
module to actually show something in the preview pane (Listing 5, line 22).
Listing 5
funnel.scad
01 module hat () { 02 difference () { 03 cylinder (r1=8, r2=2, h=10, center=true, $fn=50); 04 cylinder (r1=7.5, r2=1.5, h=10, center=true, $fn=50); 05 } 06 } 07 08 module pipe () { 09 translate ([0,0,10]) { 10 difference () { 11 cylinder (r=2, h=10, center=true, $fn=50); 12 cylinder (r=1.5, h=10, center=true, $fn=50); 13 } 14 } 15 } 16 17 module funnel () { 18 hat (); 19 pipe (); 20 } 21 22 funnel ();
You can take this modularity further and save a set of modules into a separate .scad file altogether. You can then import them back into other files using either the include
or the use
methods.
The include </path/to/file.scad>
method imports the whole thing, modules and commands that are not in modules, integrating the whole imported file into your current file. The use </path/to/file.scad>
method, on the other hand, only imports the modules so you can use them as library modules with the code in your current file.
This means that, to get a funnel with include
, all you have to do is:
include <funnel.scad>;
To do the same with use
, you would also have to call the funnel ()
method like this:
use <funnel.scad>; funnel ();
Conclusion
This article has covered the most essential bits and pieces of the OpenSCAD language. With this and the user manual's excellent documentation [5], you should be able to start creating your first 3D pieces.
That said, there is quite a lot more to learn regarding OpenSCAD. We'll be looking at more advanced things in next month's issue. We will also be creating a real piece to print and showing how you can go all the way from concept to real physical object.
Until then, have fun!
Infos
- Thingiverse: https://www.thingiverse.com/
- Atelier: https://atelier.kde.org/
- OpenSCAD: http://www.openscad.org
- FreeCAD: https://www.freecadweb.org/
- OpenSCAD User Manual: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual
« Previous 1 2 3
Buy this article as PDF
(incl. VAT)
Buy Linux Magazine
Subscribe to our Linux Newsletters
Find Linux and Open Source Jobs
Subscribe to our ADMIN Newsletters
Support Our Work
Linux Magazine content is made possible with support from readers like you. Please consider contributing when you’ve found an article to be beneficial.
News
-
Endless OS 6 has Arrived
After more than a year since the last update, the latest release of Endless OS is now available for general usage.
-
Fedora Asahi 40 Remix Available for Macs with Apple Silicon
If you've been anticipating KDE's Plasma 6 for your Apple Silicon-powered Mac, then you're in luck.
-
Red Hat Adds New Deployment Option for Enterprise Linux Platforms
Red Hat has re-imagined enterprise Linux for an AI future with Image Mode.
-
OSJH and LPI Release 2024 Open Source Pros Job Survey Results
See what open source professionals look for in a new role.
-
Proton 9.0-1 Released to Improve Gaming with Steam
The latest release of Proton 9 adds several improvements and fixes an issue that has been problematic for Linux users.
-
So Long Neofetch and Thanks for the Info
Today is a day that every Linux user who enjoys bragging about their system(s) will mourn, as Neofetch has come to an end.
-
Ubuntu 24.04 Comes with a “Flaw"
If you're thinking you might want to upgrade from your current Ubuntu release to the latest, there's something you might want to consider before doing so.
-
Canonical Releases Ubuntu 24.04
After a brief pause because of the XZ vulnerability, Ubuntu 24.04 is now available for install.
-
Linux Servers Targeted by Akira Ransomware
A group of bad actors who have already extorted $42 million have their sights set on the Linux platform.
-
TUXEDO Computers Unveils Linux Laptop Featuring AMD Ryzen CPU
This latest release is the first laptop to include the new CPU from Ryzen and Linux preinstalled.